Compensators & Brakes Gun Parts

(391 deals total)

The KAK Industry Compensator maintains the same size as an A2 birdcage while achieving remarkable performance. A closed face and gas ports in the upward position help direct expelled gasses to control muzzle climb and improve follow up shots. Back Specifications Brand: KAK Industry Finish: Manganese Phosphate Material: Steel - 4140 Chrome Moly Suppressor Mount: A2 Mount Thread Pattern: 1/2 X 28 Type: Compensator MPN#: KAK-COMP556

The Spike’s Tactical Dynacomp is a 5.56 NATO muzzle device designed to reduce recoil impulse and muzzle climb to provide faster follow up shots. The Dynacomp accomplishes this by redirecting much of the blast along the vertical and perpendicular planes of the muzzle to lower muzzle rise, while the rest of the gas presses hard against the front of the device, thus restricting the gun’s movement to the rear. The ports on the Dynacomp are ball dimpled for smooth expansion of gases and rapid heat dissipation.

KAK Industries 1/2x28 .223/5.56 Slim Line Flash CanIn need of a linear compensator to direct blast, noise and gases down range? The Slim Line flash can from KAK Industries is a great option. This particular model is perfect for 5.56, .223 or 22LR pistol, rifle or SBR builds, and it can be used on .22LR rifles or rimfire caliber rifles shooting 9mm or smaller. Following the KX5 diameter, this flash can will fit under most handguards and rails. Keep in mind that it does not use a crush washer so it should be torqued directly against the barrel shoulder.

At a glance: Dramatically reduces muzzle rise and improves accuracy Large openings for easy cleanings Installs in seconds Threading: ½ x 28 TPI Threaded end barrels. Outside diameter: 0.950”

The Radical Firearms Zero Impulse Muzzle Brake features a highly effective, patent pending three chamber design that redirects high pressure gasses. This significantly reduces both felt recoil and muzzle rise, aiding the shooter in staying on target even during full auto fire. The rear-angled side ports with generous top ports are exceptionally effective, allowing for faster follow-ups and dramatically reducing the effort required to stay on target.

This micro flash can works great as a linear small compensator, which directs your rifles blast, noise and escaping gases down range. These 5.56 linear comps are perfect for SBR / pistol 223 builds. They also work great on .22LR AR's, or any other rimfire caliber that shoots a projectile measuring 5.56 or smaller. This slim line design follows the KX5 diameter but is much shorter and will fit under most handguards and rails that the original flaming pig would otherwise not fit under. 1.200" DIA 1.750" LONG 6061 ALUMINUM BLACK HARD ANODIZED FINISH 1.53 OZ. 3/4" WRENCH FLATS

Copy of the standard AK slant brake. Standard AK 14 x 1 Left Hand (LH) Threads with a detent notch for the AK muzzle brake retaining pin. For 7.62mm Rounds. Made in USA, counts as 1 part for 922r compliance. Marked 'USA'

This MICRO .308 flash can works great as a linear compensator, which directs your rifles blast, noise and escaping gases down range. These 308 linear comps are perfect for SBR / pistol 300 blackout builds, or any short barrel AR that shoots a projectile that is 7.62 or smaller. This slim line design follows the KX5 diameter and will fit under most handguards and rails that the original flaming pig would otherwise not fit under. 1.200" DIA 1.750" LONG 6061 ALUMINUM BLACK HARD ANODIZED FINISH 1.53 OZ. 3/4" WRENCH FLATS THREADED 5/8-24 FOR 30 CALIBER OR SIMILAR WEAPONS

The KVP MACH Modular Linear Comp is a Patent Pending linear compensator system that is completely user configurable! If you've struggled to find a comp the correct length for the perfect "tuck," configure your own! By utilizing 1-1/8"x28 TPI internal threads, the MACH Modular Linear Comp can utilize common suppressor attachments, such as a SilencerCo 3-Lug Mount, SilencerCo Direct thread mounts, etc. KVP has opened up a level of modularity that has never before been offered in the Linear Comp market.

The QUAD is a pistol compensator from the Strike Micro Threaded Comp (SMTC) line that can work with just about any size slide using a threaded barrel with 1/2x28 Threads Per Inch (TPI). The wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise. SI internal testing has typically seen a reduction average range (dependent on application) of 15-30% in felt recoil. This QUAD version in the SMTC line has a built-in anti-rotation system using the front tip of the pistol guide rod for most applications other than pistols with a flush guide/recoil rod system.

SPECIFICATIONS: Brand: Sylvan Arms Model: 9mm Glock Compensator Finish: Nitride Black Oxide Platform: Glock 19 Thread Pitch: 1/2x28 Caliber Compatibility: 9x19 Luger Type: Compensator Looking for a Coupon Code?! Use the Current Month and Year (ie: august2023) at checkout to save on your next order Cannot Be Combined With Any Other Promotion Or Coupon Code Did you Know That We Offer FREE Printable Range Targets

Quick Overview SKU: 39313 UPC: 820103732611 MFR#: DGN556B - Caliber: 5.56X45mm / .223 - Material: Super Hard Milspec Steel - Finish: Nitride - Dimensions: L: 2.570'', DIA: .870'' - Weight: 3.2oz - Thread: 1/2-28 UNEF R/H - Serial numbered for quality control - Made in the USA. The Patent Pending Dragon is a Muzzle Brake & Compensator designed for 556X45mm / .223 Caliber AR15 style rifles with 1/2-28 UNEF Right Hand threaded muzzles.

Legion USA secured a new batch of authentic Russian made GK-01 muzzle brakes at a new low price. Don't settle for a copy get the original Russian made.The Molot Gk-01 muzzle brake greatly reduces recoil, reduces muzzle rise and improves in accurate follow up shots. Works great on any Vepr 12 or Saiga 12 shotgun.

Description We designed the KVP XL Linear comp for pistol caliber carbine, and pistol builds. The extra long length of this comp makes it an extremely functional linear comp, by utilizing a HUGE expansion chamber. In addition to the blast controlling functionality, it allows builders the option to use longer Hand Guards in short barreled pistol caliber rifle and pistol builds. Machined from billet 6061 AL, the KVP XL Linear comp is an excellent light weight, highly functional compensator for your pistol caliber builds!

100-019-275WB AR-15 Gamma 556 Muzzle Brake 5.56 1/2-28 Black Caliber: 22 Caliber (.223-.224) Finish: Black Threads: 1/2-28 Description Specs

100-019-276WB AR .308 Gamma 762 Muzzle Brake 7.62 5/8-24 Black Caliber: 30 Caliber (.308) Finish: Black Threads: 5/8-24 Description The VG6 GAMMA 762 is a muzzle brake and compensator hybrid. It virtually eliminates recoil and minimizes muzzle movement. The unique combination of both braking and compensating features inspire shooter confidence and allows the shooter to make very fast follow up shots. Its unique chamber geometries give it a very soft feel in the shoulder and the gas ports dimensions have been strenuously tested to give the utmost control to the muzzle.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. The Glock Micro Compensator is threaded in the standard 1/2×28 thread pitch.

Description

Kaw Valley Precision Linear Comps are part of a small family of compensators aimed at taming muzzle concussion. The KVP linear comp, collects and redirects muzzle gases away from the shooter. This redirection helps reduce the perceived decibels the shooter experiences at his or her ear. By pushing excessive noise and concussion downrange, not only will the shooter experience a much softer shooting experience, bystanders will also benefit from the redirection of the muzzle gasses.

The Radical Firearms Ghost flash hider features four elongated ports that quickly disperse and cool the expanding gasses caused by shooting, so that it effectively reduces the muzzle flash. Reducing the bright flash helps to preserve your night vision when shooting in low light conditions. It is threaded 1/2x28 for use with your favorite .223 or 5.56 AR-15 rifle and includes a crush washer for installation. The Ghost flash suppressor is made from high quality chrome moly steel and has a durable Melonite finish that protects against corrosion and wear.

The VG6 GAMMA 556 is a high performance muzzle brake for eliminating recoil. It was designed using state of the art engineering techniques, utilizing CFD (Computational Fluid Dynamics) and CAE (Computer Aided Engineering). This product is 100% CNC machined for optimal performance.

Kaw Valley Precision Linear Comps are part of a small family of compensators aimed at taming muzzle concussion. The KVP linear comp, collects and redirects muzzle gases away from the shooter. This redirection helps reduce the perceived decibels the shooter experiences at his or her ear. By pushing excessive noise and concussion downrange, not only will the shooter experience a much softer shooting experience, bystanders will also benefit from the redirection of the muzzle gasses.

LANTAC USA manufactures the highest quality accessories for AR-15/M16 pattern rifles. Precision made in the U.S.A., rifles, muzzle brakes and more.

Description SureFire designs and manufactures a wide variety of firearms accessories, from weapon lights to suppressors. The leading manufacturer of rugged, powerful lights, SureFire is synonymous with excellence in handheld illumination. The Warden Blast Diffuser directs concussive blast forward of the weapon system without venting gas to the side. This reduces overpressure felt immediately to the left and/or right of the firing position. When fired from the prone position, the device mitigates dust signature.

The Strike Industries King-Comp, compatible with the FF-CRD, features large dual chamber design, which was engineered to reduce felt recoil and help reduce the side concussion with the specifically angled gas ports. To top it off, the K-Comp features 4 serrated prongs provide some flash suppression. The K-Comp is a great alternative if you're looking for a cross between a compensator and a muzzle brake or effective “combo” muzzle device. Brand: Strike Industries Finish: Manganese Phosphate Manufacturer: Strike Industries Material: Steel Suppressor Mount: No Thread Pattern: 5/8 X 24

Heavy Duty Steel AR-15 Golf Ball Launcher FEATURES: Attaches to the muzzle of an AR-15/ M4/ M16 & launches Golf balls with 5.56/.223 Blanks. Screws onto the end of AR-15/ M4/ M16 barrel threads Uses 5.56/.223 Military Blanks to launch Golf Balls. Do not use Live Ammo Launches Golf Balls to several hundred yards (400+ yrds) Any other use than for a golf ball launcher is not recommended Steel Construction SPECIFICATIONS: Length: 5.3" Weight: 18.1 oz

The Midwest Industries .30 Caliber AR-10 Muzzle Brake has a three chamber design that significantly reduces muzzle rise. Durable tool steel construction with a Manganese phosphate finish for corrosion resistance. Features: - 5/8x24 thread pitch - Three chamber design - Tool steel construction - Manganese phosphate finish - Crush washer included - Made in the U.S.A. - Lifetime Warranty - Weight 4 oz

- Use this filler to get the coupon code working HERE 100-025-669WB AR-15 Epsilon 556 BBSS Muzzle Brake 5.56 1/2-28 SS Caliber: 22 Caliber (.223-.224) Finish: Bead Blasted Stainless Steel Material: Stainless Steel Threads: 1/2-28 Description

This Muzzle Device Is Similar In Function And Size To An A2 Flash Hider. The Gas Ports Help Channel Gases & Therefore Reducing Muzzle Rise Enabling The Shooter To Get Back On Target Faster For Follow Up Shots. Made From 4140 CMV Steel In The USA With Manganese Phosphate Finish Made This A Robust And High-Quality Muzzle Device.

Want more of a discount? Apply to be a dealer here!

Want more of a discount? Apply to be a dealer here!

Key features include its large internal expansion chamber and multiple ports to the top and to the sides. These features create a substantial reduction in muzzle rise and felt recoil to keep you on target. Noise signature and side blast are significantly less than the typical muzzle brake and its solid bottom reduces dust signature when shooting in the prone position. Like our TMB, the XHC is precision machined from 303 stainless steel for strength and resistance against corrosion. 3 calibers, 4 XTREME profiles and 5 finishes to choose from.

DROGON .223 / 5.56 STAINLESS STEEL OR BLACK NITRIDE MUZZLE BREAK Features: • STAINLESS STEEL • For the .223 / 5.56 • 1/2 x 28 TPI • Comes with a crush washer • 2.8 ounces • 2. 3/8 inches • Made In America By Military Veteran's

The EFFIN-A Compensator was designed to allow the end user the ability to adjust the manner in which the gas exits from the weapon. The EFFIN-A features 7 columns and 4 rows of exit ports that can be either opened or closed through the very simple use of set screws. the exit ports are not threaded completely through to eliminate the the possibility of the screw being over turned into the chamber. This feature also allow the screw to “bottom out” increasing tightness and ensuring that it will not work itself out under the pressure of the gasses being released by the weapon.

Strike Industries products are designed by shooting experts for the shooting sportsman. The Strike Industries JCOMP Gen 2 is based on the classic Type 89 compensator in used by the Japanese Self-Defense Forces. Updated and enhanced, the Gen 2 retains all the great features of the original JCOMP with improved muzzle rise compensation and compatibility with blast mitigators like the Strike Industires Oppressor or the Ferfrans CRD. This effective two chamber design performs very comparably to some of the top-tier comps and brakes on the market at just a fraction of the price.

100-027-890WB Epsilon 762 Muzzle Brake 5/8-24 SS Black Caliber: 30 Caliber (.308) Finish: Black Nitride Material: Stainless Steel Threads: 5/8-24 Creates Low Energy Recoil Impulse for Superb Muzzle Control

DIY Pistol Kit: Strike Industries Gen 3 Standard Mass Driver Comp for Glock 19 and Glock 19 Compatible Handguns + Reptilia 'Blackhole' Magwell for Glock Gen 3 & 4, G19/G23, Black Nylon Strike Industries Gen 3 Standard Mass Driver Comp for Glock 19 and Glock 19 Compatible Handguns

Description - .223/5.56 - High grade steel construction - Reduces flash signature - Reduces muzzle rise - Includes crush washer - Lifetime Warranty Weight 0.0000 oz MPN 1290 Muzzle Device Type Muzzle Brake Threads 1/2×28 Caliber .22 (.223/5.56/.232 Finish Nitride / Melonite SKU: 1290

The Strike Industries Triple Crown Comp features a three-chamber design that effectively reduces felt recoil while a set of vertical gas ports keeps your muzzle flat and on target. The aggressively crenelated crown is an effective stand-off defensive device or as support for wire cutting. An effective cross between a compensator and a muzzle brake, the Triple Crown is exactly what you need! As a bonus, this brake is fully compatible with the Ferfrans Concussion Reduction Device (CRD), allowing the side blast to be reined in for shooting indoors or with neighbors on the line.

Quick Overview SKU: 40194 UPC: 820103732628 MFR#: DGN762B - Caliber: 7.62mm / .308 - Material: Hardened Milspec Steel - Finish: Nitride - Dimensions: L: 2.66'', DIA Body: 0.866''  DIA Fins:0.900''   - Weight: 2.8oz - Thread: 5/8-24 UNEF R/H - Serial Numbered for Quality Control - Made in the USA

The VG6 Precision EPSILON 762 is a high performance muzzle brake for eliminating recoil. Compatible with most common .30 caliber chambered rifles, this hybrid device features both recoil compensation and flash signature mitigation in one package. With a continued focus on improved recoil control, the EPSILON 762 features a new enhanced chamber design that improves gas flow and felt recoil measurably over previous versions. We have also focused on saving weight through both the chamber design and aggressively cut channels along the length of the device.

The VG6 Precision EPSILON 762 is a high performance muzzle brake for eliminating recoil. Compatible with most common .30 caliber chambered rifles, this hybrid device features both recoil compensation and flash signature mitigation in one package. With a continued focus on improved recoil control, the EPSILON 762 features a new enhanced chamber design that improves gas flow and felt recoil measurably over previous versions. We have also focused on saving weight through both the chamber design and aggressively cut channels along the length of the device.

At a glance: Rugged and tough for police, military, and personal use Reduces recoil and muzzle rise Sharpened teeth for door breaches

PRODUCT DESCRIPTION Similar to A2 style brake, the open top slots and closed bottom increase muzzle control and reduce dust signature making it compliant with California Featureless laws. The end is also blocked to reduce recoil. 1/2″ x 28 threads .223/ 5.56 compatible. *This device will not reduce or remove flash. • Increases muzzle control • Reduces dust signature • Closed front design reduces recoil • 1/2″ x 28 threads • Compatible with .223/5.56 barrels Weight 0.0000 oz MPN PJ006T Muzzle Device Type Muzzle Brake Threads 1/2×28 Caliber

Description The Strike Industries King-Comp features a large dual chamber design, which was engineered to reduce felt recoil and  help reduce the side concussion with the specifically angled gas ports. The King-Comp is a great alternative if you’re looking for a cross between a compensator and a muzzle brake or effective “combo” muzzle device. Product Spec: – Length: 2.62″ – OD: 0.87″ – Weight: 3.8 oz – Materials: Steel – Color: Black – Caliber: .223/5.56 Thread Pitch: 1/2×28 Package Includes: -1 x King Comp -1 x Crush Washer Features:

The Strike Industries Warhog Comp is the incredibly compact and lightweight muzzle brake you've been looking for. The single baffle design allows the WarHog Comp to be just 1.3" long, less than an inch wide, and just 2.6 Oz. The WarHog's minimal size belies it's highly effective straight line recoil reduction, perfect for shooters who prefer a neutral set up. Features: - Straight line recoil reduction - Compact and highly efficient - Single baffle design for 5.56 NATO - High strength steel construction - Weighs just 2.6 Oz - 1/2x28 threading Brand: Strike Industries

OEM - NO BOX, NO CRUSHWASHER, TOOL THE EPSILON 556SL IS THE IDEAL MUZZLE BRAKE FOR 14.5" RIFLE BUILDS. FEATURING AN OUTSIDE DIAMETER OF .745", THE EPSILON 556SL CAN BE PINNED AND WELDED TO YOUR BARREL WHILE STILL ALLOWING FULL MAINTENANCE AND REMOVAL OF YOUR GAS BLOCK WITHOUT HAVING TO REMOVE THE MUZZLE DEVICE. THE EPSILON 556SL UTILIZES A NEW AGGRESSIVE CHAMBER DESIGN THAT IMPROVES GAS FLOW AND REDUCES FELT RECOIL SIGNIFICANTLY. IT ALSO FEATURES DEEP CHANNEL CUTS THAT GREATLY REDUCE THE OVERALL WEIGHT TOWARD THE FRONT END OF YOUR BUILD.

Tyrant Designs 1/2x28 Black/Nickel Compensator For Glock Gen5 The Tyrant Designs Glock Gen5 Compatable Compensator, or the “T-Comp”, has a unique, two piece, design that installs securely without the need for set screws or any attachment methods. The walls within the compensator help to break the flow of gasses which are then re-directed to two chambers located at the bottom of the compensator. This entire process will reduce muzzle rise and recoil. This compensator is compatible with ½-28 threaded barrels for 9mm. SPECIFICATIONS: Brand: Tyrant Designs

Heavy Duty Steel AR-15 Golf Ball Launcher The NC Star Golf Ball Launcher is an accessory that attaches to virtually any AR-15 with a threaded barrel. This simple to use design is ready to go by simply removing the muzzle device from the AR-15 and installing the NC Star Golf Ball Launcher. Blank ammunition is then loaded into the rifle, then you drop the ball into the launcher and start propelling golf balls down range. FEATURES: Attaches to the muzzle of a AR-15/ M4/ M16 & launches Golf balls with 5.56/.223 Blanks. Screws onto the end of AR-15/ M4/ M16 barrel threads

Features: Classic A2 Style 1/2x28" TPI 5.56/.223 Caliber Made in the USA

Our Extended Length "Tanker" muzzle brake has 10 large 45 degree rearward-facing side ports, redirecting pressure and drastically reducing overall recoil and stabilizing the rifle. The 10 smaller vertical ports act to reduce muzzle rise. The result is quicker realigning for more accurate follow-up shots. Steel jam nut to properly align the brake is included. Features: 6061-T6 aluminum construction Black Parkerized finish Extended "Tanker" design with 20 total ports 5/8"x24 thread pitch Length: 3.9375" Includes steel jam nut Fits: AR-10 .308

KAK Industries 5/8x24 SLIM LINE Flash Can - .308 This flash can works great as a linear compensator, which directs your rifles blast, noise and escaping gases down range. These 308 linear comps are perfect for SBR / pistol 300 blackout builds, or any short barrel AR that shoots a projectile that is 7.62 or smaller.

The advanced SureFire PROCOMP 762 Muzzle Brake for AR-10/LR308 rifles greatly reduces recoil impulse and features neutral porting, loading bi-pod legs evenly to keep you on target for faster shot recovery. Its patented Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified steel bar stock with a Melonite finish providing maximum corrosion resistance.

The Phantom Flash Suppressor has been designed to work as a muzzle compensator while maintaining excellent flash hiding capabilities. This 5 port design has no downward facing port which helps eliminate dust problems when shooting in the prone position. The 5C2 features an aggressive front end used in hand to hand situations. For 1/2”-28 threaded barrels only. Includes crush washer.

The advanced SureFire PROCOMP 556 Muzzle Brake for AR-15/M16 rifles greatly reduces recoil impulse and muzzle rise to keep you on target for faster shot recovery. Its patented Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from U.S. mill-certified steel bar stock with a Melonite finish providing maximum corrosion resistance. Blind pilot holes at the 3 and 9-o’clock positions enable fine-tuning of recoil characteristics while an additional pilot hole at the 6-o’clock allows indexing the adapter at bottom dead center.

The SureFire 3-Prong Eliminator 5.56 Flash Hider is designed for AR-15 platforms with 1/2x28 threaded barrels. The 3P Eliminator flash hider is precision machined from stainless steel, Melonite finished, and built to withstand heavy use. The 3 prongs eliminate up to 99% of muzzle flash when compared to a bare muzzle and the precision single-point cut threads ensure concentricity with the bore. The SureFire 3P Eliminator 556 does not have a suppressor mount. Features: - For 5.56mm 1/2x28 threaded barrels - 3 prong design eliminates 99% of muzzle flash

Armaspec Rifter Linear Muzzle Brake .223/5.56 1/2x28 Thread, Black Don't forget to hit that thumbs up! Like what you see?  Subscribe to get deals straight to your inbox.   

Tanker style muzzle brake is made of all steel construction with a heat treated, erosion resistant Black Nitride finish. It comes with a .223/.556 1/2″x28 thread pitch. Reduces recoil and barrel whip. Features: Length: 2.76 in. Outer Diameter: 1.24 in. Net Weight: 6 oz. Color: Black Material: Steel ADDITIONAL INFORMATION WEIGHT 0.0000 oz DIMENSIONS 2.7600 × 0.0000 × 0.0000 in MPN MZ1009 FINISH Stainless TITLE Default Title 2112

100-019-277WB AR-15 Epsilon 556 Muzzle Brake 5.56 1/2-28 Black Caliber: 22 Caliber (.223-.224) Finish: Black Threads: 1/2-28 Designed for the discriminating shooter and professional end-users, VG6 Precision's EPSILON 556 affords you the best muzzle control and recoil mitigation the industry has to offer. This is a true combination muzzle brake / compensator / flash hider. Its performance is matched only by the amazing look of this device.