Front view of the DOTpro 320 40mm gas mask filter
Top view of the DOTpro 320 40mm gas mask filter Bottom view of the DOTpro 320 40mm gas mask filter Side view of the DOTpro 320 40mm gas mask filter Side and top view of the DOTpro 320 40mm gas mask filter Instruction manual for the DOTpro 320 40mm gas mask filter Full view of the DOTpro 320 40mm gas mask filter, with box and instructions Label view of the DOTpro 320 40mm gas mask filter Front view of the CM-6M tactical gas mask with DOTpro 320 40mm gas mask filter Three quarter view of the CM-6M tactical gas mask with DOTpro 320 40mm gas mask filter Side view of the CM-6M tactical gas mask with DOTpro 320 40mm gas mask filter
Front view of the DOTpro 320 40mm gas mask filter
Rear view of the DOTpro 320 40mm gas mask filter
Top view of the DOTpro 320 40mm gas mask filter
Bottom view of the DOTpro 320 40mm gas mask filter
Side view of the DOTpro 320 40mm gas mask filter
Side and top view of the DOTpro 320 40mm gas mask filter
Instruction manual for the DOTpro 320 40mm gas mask filter
Full view of the DOTpro 320 40mm gas mask filter, with box and instructions
Label view of the DOTpro 320 40mm gas mask filter
Front view of the CM-6M tactical gas mask with DOTpro 320 40mm gas mask filter
Three quarter view of the CM-6M tactical gas mask with DOTpro 320 40mm gas mask filter
Side view of the CM-6M tactical gas mask with DOTpro 320 40mm gas mask filter

MIRA Safety DotPro 320 40mm Gas Mask Filter

  • 7.5 year life span for long-standing reliability
  • Multigas rated filter to counteract a variety of NBC threats, especially toxic industrial chemicals
  • Uses 40mm NATO threading for compatibility with a wide array of available gas masks

OUR PRODUCTS ARE TRUSTED BY PROFESSIONALS ALL OVER THE GLOBE

We have established firm relationships with agencies worldwide and are deployed by:

United States Department

The United States

DEPARTMENT OF DEFENSE

Czech Ministry

Czech Republic

MINISTRY OF DEFENSE

Turkmenistan Ministry

Turkmenistan

MINISTRY OF INTERIOR

Turkey Ministry

Turkey

MINISTRY OF INTERIOR

South Africa Ministry

South Africa

MINISTRY OF INTERIOR

Romania Ministry

Romania

MINISTRY OF DEFENSE

Portugal Ministry

Portugal

MINISTRY OF INTERIOR

Lithuania Ministry

Lithuania

MINISTRY OF INTERIOR

Arms of Latvia

Latvia

MINISTRY OF INTERIOR

Ukraine Ministry

Ukraine

MINISTRY OF DEFENSE

Shop with Confidence

1 year factory warranty

5 years on select products

Free shipping for

all U.S. orders

Got a question before you order?

Call us at 888-316-1462

Description

IMPORTANT NOTE: The current batch was manufactured in 10/2020, with an expiration date of 04/2028. This product is currently on clearance and will be discontinued once all units are sold. For that reason, they are offered at a deep discount. 

--

Combining superior multi-gas protection with a price point that’s tough to beat, our DOTPro 320 respirator filters give you the best bang for your buck when you’re stocking up for yourself, your family, or your organization. Flexible, affordable, and built to last with a 7.5-year shelf life, DOTPro 320 multi-gas filters provide cost-effective protection for known respiratory threats. 


Key Features:

  • 40 mm x 1/7” NATO filter standard (EN 148-1:1999) threading
  • Built to comply with a wide variety of international standards, including EN 14387:2004+А1:2008, EU Health and Safety requirements
  • Practical multi-gas filter that protects the user from toxic industrial chemicals (TICs) and other threats
  • 7.5-year shelf life, with expiration date clearly marked on the filter housing 
  • Easy to deploy and color-coded based on the protection it offers


Flexible and Cost-Effective Protection from Catastrophe 

A gas mask is only as good as the filters attached to it, and here at MIRA Safety, we pride ourselves on offering the very best for every budget—like the flexible DOTPro 320.

This is the best gas mask filter for anyone on a budget or buying for a larger family/group. While our NBC-77 SOF filter still has it beat with a much longer shelf life and broader overall protection, these DOTPro 320 gas mask canisters provide similar levels of protection against a number of common respiratory threats.

That means DOTPro 320 gas mask filters can be just as effective as the premium alternative when facing known threats in a known environment. Engineered to meet strict EU standards and accompanied by relevant filtration data (see below), DOTPro filters are at least equal in “by the numbers” quality to most filters on the market.

Combine that with superior usability, color-coded labeling, clearly marked expiration dates, and rugged construction and you get the best entry-level gas mask filter on the market today.

When it comes to stocking up on gas mask filters, we advise keeping as many good filters on hand as you can comfortably afford. So, even if you’re buying a few high-end NBC-77 SOF filters, it wouldn’t hurt to have a few DOTPro filters for added protection, flexibility, and peace of mind.

NOTE: These gas mask filters are primarily designed to protect the user from toxic industrial chemicals and NOT intended for military or combat usage. 

The initial filter resistance to constant airflow at a volumetric flow rate of 95 dm/min, Pa (millimeter of water column), max. 


DOTpro 320 А2В2Е2К2Р3 R D

– cyclohexane at a concentration of (17.5 ± 1.7) mg/dm3


35

– hydrogen cyanide at a concentration of (5.6 ± 0.5) mg/dm3

25

– sulfur hydride at a concentration of (7.1 ± 0.7) mg/dm3

40

– chlorine at a concentration of (15.0 ± 1.5) mg/dm3

20

– sulfur dioxide at a concentration of (13.3 ± 1.3) mg/dm3

20

– ammonia at a concentration of (3.5 ± 0.3) mg/dm3

40

 

Storage

DOTpro 320 filters should be stored in a cool, dry place away from hazardous substances. The filters should be stored in their original packaging at temperatures from 50°F to 120°F  with maximum humidity of 98%. Storage in conditions other than those specified can affect shelf life. Expiration date is specified on each DOTpro 320 filter. The guaranteed 7.5-year shelf life is for DOTpro 320 filters in the original Sorbent JSC packaging and from the date of manufacture.

QUESTIONS & ANSWERS

Ask a Question
  • Can these filters protect against Asbestos and Mold?

    All of our filters contain a P3 filter which is a high-efficiency ULPA filter (a step above HEPA) that will filter out particles at 99.99995% efficiency. The filtration grade is U16 (U17 is the max). To give you a better idea, the recommended filter rating to protect against asbestos, lead, and cadmium dust is HEPA.

  • Viruses can only survive on surfaces for a period of a few days maximum. So if the only concern is only viruses like the coronavirus (and I don't have to worry at all about exposure to chemicals, etc.), why is it that gas mask filters cannot be reused after a few days, when any viruses that were on/in it will no longer be a danger?

    For safety reasons, we cannot recommend reusing any filter. This would go against all safety standards set out by regulatory agencies all over the world regarding disposable filters.

    If you insist on re-using a filter against COVID-19, it would be best to refer to CDC's guidelines. As new information is constantly being released regarding this virus, it would be best to refer to their updates on how long you'll need to quarantine an exposed filter before you can re-use it.

  • I am looking to use vaporized oxalic acid to treat beehives. I need to be able to block organic vapors along with acid gases. I currently have a M40 military gas mask, which filter will work for this application? Thanks!

    Click here for a link to the DOTpro 320 technical specifications. If you look at the rating for the DOTpro 320 (A2B2E2K2 P3 R D), A2 means organic gases & vapors-boiling point > 65°C at 5000ppm, and E2 means acid gases at 5000ppm. So long as the gases you are exposed to meet the technical description, the filter will work for your application.

  • What are some examples that they protect the user from? Just as tear gas being one example.

    This filter is rated under the European designation A2B2E2K2 P3 R D. To decode this, please read our blog post which details what each letter/number combo means.

  • Will this work With Scott Aviva Half Face Respirator which has NID 40 threads?

    No, they will not, as the Scott Aviva has a different type of 40mm connection port. The keywords you should look for are "EN 148-1 thread" or "40mm NATO".

  • Will the DOTpro 320 fit and seal on a GP5 gas mask with 40mm GOST threads? If so, do you have express shipping in the USA? and what is the limit of units per order?

    It will not fit a GP5 as this filter has different threading (40mm NATO). We do have express shipping that you can choose at checkout, however, all products that are in stock will still have a standard lead time of 3-5 days from the purchase date due to increased demand. There is also no limit as to how many you can purchase.

  • Will these fit a MSA millennium mask?

    Yes they will as they both have 40mm NATO threading.

  • This will work with the Israeli m15 mask right?

    Yes, as they are both threaded for 40mm NATO.

  • How many hours of consistent use is each of the MIRA P3 rated filters effective for protection against viruses?

    MIRA P3 flters are effective for as long as you can wear the mask, so long as there are no other threats present. Please keep in mind, filters are disposable products and should be discarded after they come in contact with a contaminant.

  • You state in a previous question that "So long as the only threat is viral particles, it will last for as long as you can wear the mask." Does that mean the filter will filter viral particles for a long long time (months/year). Or do you mean as long as you can wear the mask in one sitting?

    This means as long as you can wear the mask in one sitting.

  • As long as I decontaminate the outside of the filter, keep the filter attached to the mask, and cover the intake, how long will the filter be fulfilling its purpose?

    Respirator filters are a disposable product, meant for one single use. For your safety, we do not recommend re-using a filter that's been exposed to contaminants.

  • How long can the filter be used until one should consider it ineffective against a virus? For example, can one install the filter; go out to the supermarket; come home and take off the mask; wash the mask and then when one needs to go out again, assume that the filter will work? Or is this solely effective for one-time use and has to be disposed of as soon as one takes off the mask?

    Filters are only suitable for one use, as they become toxic waste once they come in contact with a contaminant. You can decontaminate the outside of the filter, but you cannot decontaminate or regenerate the inside of the filter.

  • How long does it last in use for viral protection?

    So long as the only threat is viral particles, it will last for as long as you can wear the mask.

  • There is very little information provided to explain exactly what purpose are facilitated by the cartridges you are selling. These things are very expensive. What is the cheapest canister I can purchase to protect against the coronavirus?

    The DOTpro 320 is the cheapest product on our website to protect from the coronavirus. In general, the most affordable option (if you go with a full-face respirator) would be 40mm NATO threaded P3 filters. We will be releasing these very soon on the website, and they will retail for $25/unit. Make sure to subscribe to our newsletter for updates.

  • What's the difference between the DOTpro 320 and NBC-77 SOF filters?

    The DOTpro 320 is a general-purpose ABEK filter with a 7.5-year shelf life, while the NBC-77 SOF is a 20-year shelf life CBRN filter. You can tell them apart by looking at the filter rating (A2B2E2K2...etc), and you will see that the NBC-77 SOF covers more threats than the DOTpro 320. For more information on filter ratings, please review our Gas Mask Buyers Guide.

  • I am aware that a P3 filter is required to block the coronavirus. Which one of your filters is P3?

    MIRA Safety filters (NBC-77 SOF, VK-530, DOTpro 320) are classified as "combined filters" and contain a P3 filter along with activated carbon. For those that don't know what P3 means, it is a rating for a particle filter that blocks 99.9999%+ of particulates. As viruses travel in liquid aerosols and particulates, this filter (when coupled with a full face respirator) would prevent the coronavirus from entering your breathing passages and eyes.

Reviews

Customer Reviews
4.9 Based on 81 Reviews
5 ★
94% 
76
4 ★
6% 
5
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • filters
  • Mira
  • quality
  • price
  • everything
  • delivery
  • products
  • mask
  • item
  • company
L
12/07/2023
Layton SVG verified by SHOP
United States United States

They upgraded my filter! That was very kind of them!

J
12/07/2023
James SVG verified by SHOP
United States United States

came really well sealed and works perfectly with my old soviet gas mask

Z
12/07/2023
Zachary SVG verified by SHOP
United States United States

Works

V
12/07/2023
Vincent SVG verified by SHOP
United States United States

I love it 10 stars best company on the market

A
12/07/2023
Allen SVG verified by SHOP
United States United States

Wasn’t sent the dot pro was upgraded to the ngc77s which are 3x the price and quality! Guess this happened because they ran out of the dot pros. Mira safety is awesome and I trust their products with my life!