TRU-17™ FOR SIG SAUER® Magazine Base Pad – Pack of Two
The TRU-17™ Magazine Base Pad is a direct replacement part compatible with P365 XMACRO magazines. The design of the TRU-17™ allows users to more easily load the full 17 rounds into the magazine. The TRU-17™ base pad adds weight to the bottom of the magazine which aids in dropping empty magazines. A larger grip surface allows users to index spare magazines from holsters for quicker reloads while also being able to easily extract a stuck magazine.
TRU-17™ Magazine Base Pads are NOT compatible with OEM 10RD magazines or similar magazines that do not have removeable base pads.
THE PISTOL
EVOLVED
TECH SPECS
Aircraft grade aluminum
COMPATBILITY
Sig Sauer P365 XMacro Grip Module
WHAT’S INCLUDED
2 – TRU-17 Magazine Base Pads
INSTALLATION INSTRUCTIONS
Step 1 | Remove the OEM magazine floor plate by depressing the detent in the center of the plate with a punch (or similar tool) while applying pressure to the rear of the baseplate. The OEM magazine floor plate should slide off the front of the magazine.
Step 2 | Keeping the factory spring, follower, and detent plate in place, depress the spring and detent plate. Slide the Radian TRU-17 Magazine Base Pad onto the front of the magazine until the detent snaps into place on the base pad.
Step 3 | The TRU-17 Magazine Base Pad is intended to have a small gap between the bottom of the magazine and the base pad. This added space ensures reliable and repeatable loading of the magazine to its full capacity.
Step 4 | To remove the TRU-17 Magazine Base Pad, depress the detent in the center of the plate with a punch (or similar tool) while applying pressure to the rear of the baseplate. The TRU-17 Magazine Base Pad should slide off the front of the magazine.
CAGE CODE
8BMX3
