B&T Industries V8 Atlas Bipod - No Clamp - for BT19, ADM-170-S, ARMS 17S, TRAMP, LT171 BT10-NC

BT10-NC-No Clamp model which has a block that accepts any 17S size lever style mount to include the ADM-170-S, ARMS 17S , TRAMP from Badger Ordnance and LT271.

The BT10-NC also mounts directly to our AAIS Part # BT19 and Sako TRG mount (in R&D now).

Additional Technical Specifications

• No Clamp, takes any 17S lever mount and mounts directly to our Accuracy International and Sako TRG Style Spigot mount to be released soon.
• Construction from T6061 Aluminum, Hard Anodized black
• Stainless steel springs and fasteners
• UHMW components used for smooth tracking
• 15 degrees +/- of preloaded Pan
• 15 degrees +/- of preloaded Cant
• Preload on Pan and Cant can be tightened by means of the knurled knob
• Picitinny Rail Mount interface by either standard machine screw fastener based clamp or optional ARMS 17S lever mount.
• Non orientated leg positioning use either hand to move leg into any of the four leg positions
• Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward.
• All 4 leg positions are solid allowing the shooter to load the bipod at the 45 and 90 degree positions.
• Non orientated leg length adjustment, Outer leg slides on the Inner leg locating on any of five positions ¾? apart and can be done by either hand.
• Optional 3? leg extensions to increase height available.
• Standard soft durable Rubber feet that are suitable for many surfaces.
• Optional interchangeable Ski and Multi Spiked style feet can be swapped in the field with the press of a ball plunger with a bullet tip.
• Optional mounting systems available for Accuracy International and Sako rifles.
• Estimated range of elevation on the BT10 is 5-9? from the surface up to the rail.
• Made in America