Resort V3 – The RESORT V3 Profile provides the best of both worlds. It has a raised camber platform through the inserts to retain high-speed edge hold through variable terrain, elevated contact points to land and float in powder, and traditional tip and tail arcs for smoother transitions.

Flex Rating – 5 (1 Soft - 10 Stiff)

Directional Twin – 0.5" Set Back

Radial Sidecut

Multizone Dual Core – Poppy lightweight Poplar core combined with Beech for increased power and durability. Newly re-engineered to taper between the insert packs for a more forgiving flex.

Carbon Boosters – Increases power and response while remaining ultralight.

Special Blend Fiberglass – SPECIAL BLEND is an eco-friendly wet lay-up process that uses MAGIC BEAN™ resin component requiring lower consumption of energy and yielding higher technical properties. This adhesion process improves the factory’s working environment, as it does not contain some of the same harsh chemical characteristics used in resins at other factories around the world. This configuration uses an optimum blend of 626g/m2 Biaxial fiberglass laminated in conjunction with structural additives to customize performance objectives

Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material. It is plant based, does not compete with primary food sources, and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high-yield output. This resin system is poppy, powerful, and extremely durable. MAGIC BEAN ™ resin yields much stronger and more rigid qualities allowing the wood core thickness to be decreased. The focus is to save wood core weight by increasing resin performance. This means you get a lighter board while achieving higher energy return

Superdrive ADV – The SUPERDRIVE™ base material lives in the Sintruded category of boards that deliver benefits of both sintered and extruded bases. These bases take the characteristics and manufacturing techniques used in creating extruded base material, but due to higher pressure and temperature, increase the surface hardness to levels near most sintered bases. This expands the durability and surface strength, creating a base that will be more durable when jibbing and ripping around the mountain while retaining a low maintenance and carefree lifespan of the board. SUPERDRIVE™ is the benchmark for sintruded material while SUPERDRIVE™ ADV yields higher durability and glide performance.

PLT™ Topsheet Technology – PLT™ technology is exclusive to CAPiTA MFG and magically bonds the topsheet to an already pressed snowboard.

2x4 Inserts