In stock
PSA "Sabre" Billet 13.7" Mid-Length 5.56 with 13" Quad Rail, JMAC GFHC-E Pin/Weld & Magpul SL-S Furniture
In stock

PSA "Sabre" Billet 13.7" Mid-Length 5.56 with 13" Quad Rail, JMAC GFHC-E Pin/Weld & Magpul SL-S Furniture

$999.99
Details
SKU 51655160761
Brand Palmetto State Armory
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).
Customers must read Compliance Information before purchasing.

Product Details

Details

Barrel Length: 13.7”
Barrel Material: 4150V
Barrel Finish: Nitride
Chamber: 5.56 NATO
Twist Rate: 1:7
Muzzle Device: JMAC GFHC-E Pin/Weld
Extension: M4
Gas System: Mid-Length
Gas Block Type: Adjustable
Upper Receiver: Billet
Receiver Style: Sabre M4 Flat top with feed ramps and Engraved T-Marks
Receiver Finish: Hardcoat Anodized
Forward Assist: Yes
Dust Cover: Timbercreek E AR BCD
Handguard Style: PSA 13" Quad Rail
BCG: Sabre Lightweight Carrier – Mag Phosphate Finish
Gas Rings: Sprinco Gas Rings
Bolt Steel: Carpenter 158
Bolt Carrier Steel: 8620
Staked Gas Key: Yes
Lower Receiver: Billet Lower with Ambi Bolt Release
Receiver Finish: Hardcoat Anodized
Fire Control Group: Hiperfire RBT with JP Reduced Power Springs
Buffer Tube: 7075 T6 Aluminum Mil-Spec Tube
Buffer: Taccom 3 Position buffer
Stock: Magpul SL-S, Black
Magazine: (1) 30-Round Sabre Magazine (where available by law)

**Suppressor Mount will not work with Dead Air Nomad and some SilencerCo Suppressors

Features

Barrel: 13.7" 4150V nitride finish barrel chambered in 5.56 NATO, with a 1:7 twist rate, M4 barrel extension, and a mid-length gas system.  This A2 profile barrel is finished off with a 13” PSA Quad Rail handguard, and a JMAC GFHC-E Pin/Weld muzzle device.

Upper: Billet AR upper is hard coat anodized.  Uppers include forward assist and Timbercreek E AR BCD dust cover.  These uppers are made for us right here in the USA.

Bolt Carrier Group: Sabre Lightweight Bolt Carrier Group. Shot-peened, mil-spec Carpenter 158 steel bolt. Gas Key Hardened to USGI Specifications, fastened with Grade 8 screws, and Staked Per Mil-Spec. The carrier is made with 8620 steel. The Bolt Carrier Group is Mag Phosphate finish and includes Springco Gas Rings.

Lower: These billet lowers are quality made using 7075  aluminum and are marked "MULTI" for the caliber. The finish is hard-coat anodized. The lower comes with Battle Arms Pivot/Takedown Pins, Battle Arms Bolt Catch, Battle Arms Ambi-Mag release, Hiperfire RBT Trigger with JP Reduced Power Springs, Ambi-Bolt Release, and Taccom 3 Stage Buffer system.

Reviews

Q & A

Retail Stock

Compliance

Shipping Restrictions

It is the customer’s responsibility for understanding state laws regarding all purchases made. For a comprehensive list of all Shipping Restrictions, please refer to our Shipping Restrictions By State Page found Here.

All NFA Rules Apply

These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

Magazines will be removed from firearms when shipping to states with magazine capacity restrictions.

Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

Warranty

AMERICAN MADE.
FOR LIFE.

Flag

Full Lifetime Warranty.

Palmetto State Armory firearms are covered by an industry leading Full Lifetime Warranty. This extends beyond the original purchaser. We want the person who bought a great quality firearm at an excellent price to have comfort in knowing that no matter what, the firearm can be fixed at no additional cost.

This includes shipping both ways.

We strive for excellence all the way through production and hope customers never have to use this warranty but we also pride ourselves in 99% non-repair/return ratio. It is there for peace of mind so that the consumer can be confident in their purchase. Should the consumer ever need to contact us regarding a repair under the warranty, simply use our contact form or give us a call at 877-560-7229.

Palmetto State Armory firearms and parts are backed by our Full Lifetime Warranty. Our PSA firearms and parts are warranted to be free from defects in materials and craftsmanship for the serviceable lifetime of the firearm or part. All Palmetto State Armory barrels are machined and guaranteed to be concentric with the bore of our barrels.

For the Life of our product

The liability of Palmetto State Armory under this warranty shall be limited solely to the obligation to repair or replace the firearm/part or defect at its discretion, and to pay transportation and insurance charges for return of the firearm to the owner for a rightful warranty claim. This warranty is transferable for the serviceable lifetime of the firearm or part. Modification of firearm will void this warranty. This warranty does not cover normal wear or any damage resulting from careless handling, neglect, repairs and adjustments, corrosion, improper, substandard or defective ammunition.

What we don't cover

Under no circumstances shall Palmetto State Armory be responsible for incidental or consequential damages with respect to economic loss or injury to property, whether as a result of express or implied warranty, negligence or otherwise. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. Palmetto State Armory will not be responsible for the results of careless handling, unauthorized adjustments, defective, low-quality, reloaded, or improper ammunition, corrosion, neglect, ordinary wear and tear, or unreasonable use.

Initiating a claim

To initiate a Warranty claim, call Palmetto State Armory Customer Service:

Hours: Monday through Friday, 9am - 5pm EST Email: Contact Form
  1. Customer service will issue an RMA number to allow for the return of the firearm.
  2. Warranty claims must have this RMA filled out, and included in the box with the firearm or part.
  3. The firearm or part concerned must be shipped using the prepaid label our representative emails to you.

Palmetto State Armory will pay shipping and insurance charges for the return of a firearm or part to its owner or FFL, if the related claim is a proper claim for warranty work. If Palmetto State Armory is unable to fix the original serial number, a new one will be sent out, but must go to an FFL for transfer back to the customer. Another background check will be completed at the time of transfer. Palmetto State Armory is not responsible for transfer fees at the FFL.

Loading...