Your Browser is Outdated
Strike Industries Ambush 45-Degree Optic Mount SI-AMBUSH-OM45 Color: Black, Length: 2.05 in, Height: 2.47 in, $3.00 Off w/ Free S&H
Product Videos
Questions & Answers
Customer Reviews
Helpful Positive Review
Great fitting product.
Fit underneath the front of my lpvo beautifully. Very solid mount and holds my swampfox liberty as good as I could expect. Zero issues with install or fitment. Highly recommended.
3/3 found this helpful
Helpful Negative Review
It's as if the scale is incorrect.
No matter which way you try it, this WILL NOT work with a doctor/noblex cut optic. The front two location pins line up but the bolt holes and rear pins are out of location by about .030", making this mount absolutely worthless. I tried every pin and ...
Read More...
5/7 found this helpful
Read More...
Most Recent Reviews
Versatile...
Works great.
Added as an offset to my ar-15 with LPVO.
Locks in tight and can add just about any RDS.
Most Recent Reviews
Missing components
Received this item a few days ago and it is missing the "clamp" and fastener opposite the angled mount. I cannot use this item as it has been delivered. I emailed customer service at Optics Planet and have not yet received a response.
Most Recent Reviews
would grab again!
Perfect set up for multiple dot options with included screws. I mounted the Holosun 507c with no issues and great quality piece. Highly recommend!
Most Recent Reviews
angled 45 degrees
Solid build. Good product. As specified. Flushed with the rail. I liked it seated as low profiled as i wanted. Can be mounted left or right.
Best Rated Product
Our customers have spoken – this is one of the best rated products in the Red Dot Sights & Accessories category! See more best rated Red Dot Sights & Accessories products
Color: Black Length: 2.05 inHeight: 2.47 inWeight: 1.8 ozFabric/Material: SUS630 Hardened Stainless Steel Width: 1.05 inOptic Cut: Not Applicable Hand: Ambidextrous Condition: New Red Dot Sights-Footprint: Docter
Code: 3Q-RMT-SADA1-SI-AMBUSH-OM45
MPN: SI-AMBUSH-OM45
UPC: 793811765397
List: $74.95Save $3.00
$71.95
Free Shipping*
Product Info for Strike Industries Ambush 45-Degree Optic Mount
The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. The 45-degree angle should get you out of the way of most LPVO scopes along with two mounting positions to pick from on the SI Multi-Optic Mount side. Easily place a MRDS alongside a LPVO with the low-profile SI-Ambush Picatinny rail mount that either sits flush with the top of the Pic rail or slightly below making it easier to sit under a scope or scope mount. The Strike Ambush 45 comes with a dual footprint mounting plate which has the SI Multi-Optic Mount on one side and the Aimpoint Micro Standard footprint for T-1/T-2 compatible red dots on the other side making this a new innovative modular option for a diverse market. The SUS630 hardened stainless steel Picatinny rail mount is ambidextrous for either side. The 6061-T6 aluminum mounting plate can be flipped to select which MRDS but also oriented to work with the right or left side of the Pic rail. Fitment for one or fitment for almost all MRDS on the market, the Strike Ambush 45-Degree Optic Mount gives you a simple, compact and modular just about all-in-one solution.
California`s Proposition 65
Specifications for Strike Industries Ambush 45-Degree Optic Mount:
| Manufacturer: | Strike Industries |
| Color: | Black |
| Length: | 2.05 in |
| Height: | 2.47 in |
| Weight: | 1.8 oz |
| Fabric/Material: | SUS630 Hardened Stainless Steel |
| Width: | 1.05 in |
| Optic Cut: | Not Applicable |
| Hand: | Ambidextrous |
| Condition: | New |
| Red Dot Sights-Footprint: | Docter |
Features of Strike Industries Ambush 45-Degree Optic Mount
- 45degree offset
- Dual footprint mounting plate with SI MultiOptic Mount and Aimpoint Micro Standard
- Ambidextrous for either side
- Two mounting positions to pick from on SI MultiOptic Mount side
- SIAMBUSH lowprofile mounting system
- Lightweight and highstrength
- SUS630 hardened stainless steel Picatinny rail mount
- Mounting plate machined from 6061T6 aluminum
Package Contents:
- Strike Industries Ambush 45-Degree Optic Mount
- x1 Strike Ambush 45degree mount (fully assembled)
- x1 Strike double sided optic plate
- x2 Screw for optic plate to mount M3x10mm T10 Flat
- x4 Screw for Aimpoint Micro Standard M3x7mm T10 Rounded
- x3 Screw M3x8mm T10 Flat
- x3 Screw M3x9mm T10 Flat
- x3 Screw M3x10mm T10 Flat
- x3 Screw M3x8mm T14 Flat
- x3 Screw M3x8mm T15 Flat
- x3 Screw M3x8mm T10 Rounded
- x3 Screw M3x10mm T10 Rounded
- x3 Screw M3x11mm T11 Rounded
- x5 Large mounting post
- x5 Small mounting post
- x5 Shallow mounting post
- x3 Tall mounting post
- x1 Torx tool T10
- x1 Torx tool T25
- x1 Loctite Threadlocker Blue 243
- x1 MultiOptic Mount card
- x1 Warning card
Strike Industries Ambush 45-Degree Optic Mount Orderable Models
List of Orderable Models
Strike Industries Ambush 45-Degree Optic Mount, Black, One Size, SI-AMBUSH-OM45
, MPN: SI-AMBUSH-OM45
, UPC: 793811765397
, Code: 3Q-RMT-SADA1-SI-AMBUSH-OM45
